Laboratory Freezers Model F400

For the low-temperature storage of temperature-sensitive preparations, samples and pharmaceuticals.
  • 5 models
  • Volume from 4.27 up to 31.901 cu ft
  • SN/T Climate Class (SN for model F130)
  • From -41°C to -20°C (-32°C to -20°C for model F130)
  • Certified FDA Class I

Overview

Laboratory Freezers are medical-grade freezers designed to preserve the integrity of your valuable research and clinical samples. Its advanced cooling systems ensure temperature stability, uniformity, and fast recovery. Even during the defrosting cycles, our smart auto defrosts in the freezers ensure minimal temperature deviations.

Laboratory Freezers are devices intended for the low-temperature storage of temperature-sensitive preparations, samples and pharmaceuticals at temperatures ranging from – 41°C to -20°C.

All our Laboratory Freezers are equipped with a 24*7 real time monitoring solution and are certified FDA Class I.

Key Features

Accurate Temperature Control and 24/7 Monitoring

  • Controlled air cooling system for uniform and stable temperature distribution
  • Fast temperature recovery even in case of frequent door openings
  • Safety thermostat preventing temperature below freezing
  • Extended autonomy in case of power failure
  • Audio-visual alarm system with remote transmission via SMS or email
  • °B Connected universal software for remote monitoring, reporting (in compliance with FDA 21 CFR Part 11), and long-term archiving in combination with a Data Communication Unit

Energy-Efficient andEco-Friendly Performance

  • High cooling efficiency through natural refrigerants in conformity with US SNAP and EU F-Gas regulations
  • Insulated inner doors, sealed gaskets, enhanced frame for minimized cold air loss and heat conduction
  • Frost prevention reducing pressure on the compressor
  • High-quality stainless steel cabinets with antibacterial coating and injected with thin polyurethane foam providing high thermal insulation and storage capacity

Ergonomic Design

  • 7” touchscreen with temperature display easily accessible in the door handle
  • Minimal ice formation allowing easy deicing
  • Password protected/NFC card based door locking mechanism
  • USB port and SD card slot for easy export of data
  • Set point of -41°C
  • Modular interior equipment
  • Easy access to the lower drawers
  • High-quality stainless steel and other materials for an extended life span

Specs

Model F400
Gross volume (cu ft) 15.927
Storage Capacity (cu ft) 13.561
External dimensions (HxWxD) 78.27 x 27.52 x 40.91 in
Internal dimensions (HxWxD) 45.95 x 17.6 x 28.07 in
Frequency & Supply voltage 115V, 60Hz
Energy Consumption 1.3 kWh/24h
Noise level 50 dB
Refrigerant Type Natural R600a
Hold Over time (5°C to 10°C) 1.6 h
Heat emission 27 Kcal/h
Defrosting technique Natural
Materials Stainless Steel

Contact Us

  • Please provide any additional information about your temperature sensitive shipping requirements so that we can best address your needs.